Skip to content

White and Sage Minimal Monstera Crochet Plant Pattern

Published: July 11, 2026
↓ Jump to Project πŸ“Œ Pin on Pinterest

This crochet monstera plant brings all the tropical vibes without any of the watering, repotting, or sad brown leaves when you forget about it for a week! I love the two-tone colour work on each leaf: sage green with creamy white accents gives that variegated monstera look that plant collectors obsess over, complete with the signature splits and holes.

We build this plant like a bouquet. We crochet individual leaves in three sizes, sandwich a wire spine between two matching leaf pieces, wrap and crochet stems around floral wire, and then arrange everything into a pot. It takes patience, but if you can single crochet and double crochet, you absolutely have the skills.

The finished plant stands approximately 14 to 16 inches tall, with large leaves spanning 6 to 7 inches, medium leaves 4 to 5 inches, and small leaves about 3 inches wide. It makes a beautiful statement piece for shelves, desks and windowsills.

Materials

  • Worsted weight yarn (medium weight, category 4) in sage green, approximately 200 yards
  • Worsted weight yarn in light sage or mint green, approximately 150 yards
  • Worsted weight yarn in cream or off-white, approximately 100 yards
  • Small amount of dark green yarn for leaf veins, optional
  • 4.0 mm (G/6) crochet hook, for leaves
  • 3.5 mm (E/4) crochet hook, for stems (optional, for tighter tension)
  • Floral wire, 18 gauge, cut to 8 to 12 inch lengths
  • Green floral tape
  • Yarn needle for weaving ends
  • Scissors
  • Stitch markers
  • Decorative pot or pot cover
  • Floral foam or stuffing for pot base
  • Hot glue gun, optional for assembly

Abbreviations

  • Ch: chain
  • Sl st: slip stitch
  • Sc: single crochet
  • Hdc: half double crochet
  • Dc: double crochet
  • Inc: increase, work 2 stitches into the same stitch
  • Dec: decrease, work 2 stitches together as one
  • Sk: skip
  • St(s): stitch(es)

Gauge & Size

  • Finished size: complete plant approximately 14 to 16 inches tall; large leaf span approximately 6 to 7 inches wide; medium leaf span approximately 4 to 5 inches wide; small leaf span approximately 3 inches wide
  • Gauge: not critical for this decorative project, but aim for approximately 16 sc and 18 rows = 4 inches in single crochet. If your leaves seem too floppy, try going down a hook size
  • Construction: leaves worked flat in rows in pairs, joined around a wire spine; stems crocheted as tubes around floral wire; all stems bundled into a pot
  • Skill level: Intermediate

Pattern notes: leaves are worked flat in rows, then shaped with a wire spine. The splits and holes in the leaves are created by skipping stitches and working separate sections. Work loosely enough that your fabric drapes naturally but tightly enough to maintain shape. Each leaf needs two identical pieces that get joined together with a wire sandwiched between. Stems are crocheted tubes worked around floral wire.

Large Monstera Leaf Pattern

Make 3 to 4 leaves. This leaf has the most dramatic fenestrations, and you will make two identical pieces per leaf. Using sage green yarn and the 4.0 mm hook:

Row 1: Ch 4, sc in 2nd ch from hook, sc in next 2 ch, turn. (3 sts)

Row 2: Ch 1, 2 sc in first st (inc), sc in next st, 2 sc in last st, turn. (5 sts)

Row 3: Ch 1, 2 sc in first st, sc across to last st, 2 sc in last st, turn. (7 sts)

Rows 4 through 8: Repeat Row 3, increasing at both ends each row. (17 sts after Row 8)

Row 9: Ch 1, sc in first 4 sts, ch 3, sk 3 sts (this creates the first fenestration), sc in next 3 sts, ch 3, sk 3 sts, sc in last 4 sts, turn. (11 sc, 2 ch-3 spaces)

Row 10: Ch 1, sc in first 4 sts, 3 sc in ch-3 space, sc in next 3 sts, 3 sc in ch-3 space, sc in last 4 sts, turn. (17 sts)

Rows 11 through 14: Ch 1, sc across, turn. (17 sts)

Row 15: Ch 1, sc in first 3 sts, ch 4, sk 4 sts, sc in next 3 sts, ch 4, sk 4 sts, sc in last 3 sts, turn. (9 sc, 2 ch-4 spaces)

Row 16: Ch 1, sc in first 3 sts, 4 sc in ch-4 space, sc in next 3 sts, 4 sc in ch-4 space, sc in last 3 sts, turn. (17 sts)

Left Side β€” Row 17: Ch 1, sc in first 7 sts only, turn. Leave remaining sts unworked. (7 sts)

Left Side β€” Row 18: Ch 1, sc dec over first 2 sts, sc to end, turn. (6 sts)

Left Side β€” Rows 19 through 22: Continue decreasing at the split edge every row. (2 sts after Row 22)

Left Side β€” Row 23: Ch 1, sc dec, fasten off. (1 st)

Right Side: With right side facing, rejoin yarn to the 11th stitch of Row 16 (skip 3 center stitches to create the split).

Right Side β€” Row 17: Ch 1, sc in same st and next 6 sts, turn. (7 sts)

Right Side β€” Rows 18 through 23: Mirror the left side, decreasing at the split edge. Fasten off.

Adding variegation: Using cream or light sage yarn, surface crochet or embroider accent lines following the natural vein pattern of a monstera leaf. Work from the center stem outward toward each lobe. This creates that gorgeous variegated effect.

Medium Monstera Leaf Pattern

Make 2 to 3 leaves, with two identical pieces per leaf. Work the same as the large leaf but stop increasing at Row 6 (13 sts) and reduce the number of fenestration rows. Create only one ch-3 fenestration on each side.

Small Monstera Leaf Pattern

Make 2 leaves, with two identical pieces per leaf. These juvenile leaves have no splits or holes, just like real young monstera leaves.

Row 1: Ch 4, sc in 2nd ch from hook, sc across, turn. (3 sts)

Rows 2 through 6: Inc at both ends each row. (13 sts)

Rows 7 through 10: Sc across evenly. (13 sts)

Rows 11 through 15: Dec at both ends each row. (3 sts)

Row 16: Ch 1, sc3tog, fasten off. (1 st)

Stem Pattern

Stems give your monstera that realistic upright posture. We work these in continuous rounds around floral wire, using sage green yarn and the 3.5 mm hook.

Round 1: Make a magic ring, 6 sc in ring. Do not join. (6 sts)

Round 2 onward: Sc in each st around continuously. Work until the stem reaches your desired length, typically 4 to 8 inches depending on the leaf size. Larger leaves look best on longer stems.

To close the stem: Insert floral wire through the tube. Attach the wire extending from your leaf. Wrap the connection point with floral tape. Continue crocheting around the joined wires if needed for a smooth transition. Alternatively, you can skip crocheted stems and simply wrap yarn tightly around wire-taped stems. Both methods work beautifully.

Main stem and base: Create a thicker central stem by crocheting a larger tube (start with 8 to 10 sc in your magic ring) or by bundling several wire stems together and wrapping them as one.

Finishing & Assembly

Assembling each leaf: Block both leaf pieces gently with steam or wet blocking. Cut floral wire 2 inches longer than your leaf. Wrap the wire with floral tape for a cleaner finish. Place the wire between both leaf pieces, aligned with the center. Using matching yarn and a yarn needle, whip stitch around the entire perimeter, encasing the wire. The wire should extend beyond the leaf base to become part of the stem.

Final assembly: Arrange your leaves from tallest in back to shortest in front. Bundle all stems together at the base. Secure with floral tape, wrapping tightly. Trim stems to even length at the bottom. Insert the bundled stems into floral foam inside your pot. Use hot glue to secure if needed. Gently bend and pose each leaf for the most natural arrangement.

Tips

Stiffening your leaves: If your leaves seem droopy, spray with fabric stiffener or brush with a mixture of white glue and water (1:1 ratio). Let dry completely before handling.

Colour placement: For the most realistic variegation, concentrate the lighter colours along the vein lines and outer edges of the leaves.

Pot cover: You can place a plain pot inside a decorative basket or fabric-wrapped container for an easy finished look.

Adjusting sizes: Want a bigger plant? Make more large leaves and use longer stems. For a smaller tabletop version, stick to medium and small leaves with shorter stems.

Care: Your crochet monstera is wonderfully low maintenance. Dust occasionally with a soft brush or a blow dryer on a cool setting. Keep away from direct sunlight to prevent fading. If using cotton yarn, you can spot clean with a damp cloth. This plant makes an unforgettable housewarming gift, especially for friends who love plants but cannot keep them alive!

White and Sage Minimal Monstera Crochet Plant Pattern

White and Sage Minimal Monstera Crochet Plant Pattern

By Amy  Β·  β˜…β˜…β˜…β˜…β˜… 4.9 (120 reviews)

πŸ“Œ Pin on Pinterest
Prep Time15 minutes
Craft Time10 to 14 hours
Total TimeAbout 10 to 14 hours
Makes1 crochet monstera plant in a pot
DifficultyIntermediate

Materials

Steps

  1. Crochet pairs of large monstera leaves with fenestrations and splits
  2. Crochet pairs of medium leaves and small solid leaves
  3. Add cream variegation along the leaf veins
  4. Block the leaf pieces and sandwich a taped wire spine between each pair
  5. Whip stitch around each leaf perimeter to encase the wire
  6. Crochet stem tubes around floral wire and join them to the leaves
  7. Bundle all stems, secure with floral tape and set into foam in the pot
  8. Bend and pose the leaves for a natural arrangement
Tips:
  • Make two identical pieces for every leaf so the wire hides neatly inside
  • Concentrate lighter colours along vein lines and edges for realistic variegation
  • Stiffen droopy leaves with fabric stiffener or a 1:1 glue and water mix
  • Arrange tallest leaves at the back and shortest at the front

Leave a comment

Your email address will not be published. Required fields are marked *

Join our community

Subscribe to the newsletter. Unsubscribe anytime.

↑